Assembly Procedure PC4000
PC4000Asrev05
Edition 08/2005
57
3.14 Mounting of Bucket Cylinders (Z21873)
Hook up bucket cylinders that way that rod side shows approx. 45° up
to the bearings at the boom.
Align the rod eyes with borings at the boom. Install pin (1).
Install axle stirrup (2).
Install shackle (3) with washer (04) and bolt (5).
Place lower end of the cylinders onto a pile of wood.
)
• A: Hose connection of the cylinder rod must show to the
outside.
• B: Flat area of the cylinder body must point to the front,
away from the machine.
To Next Page
Loading...
Need help?
General
