Connect the power cord to the power jack, and confirm that it is firmly inserted. •
Loose connections may cause fires.
Make sure to connect the ground wire to prevent electrocution in case of electrical •
leakage.
Confirm that there is no dust attached to the power plug before inserting it into •
the outlet. Remove, inspect, and if necessary, clean the power plug once every six
months to a year. Dust attached to the power plug may cause fires or electrocutions.
Connect the power cord to the power jack on the left side of the machine.
1
Secure the power cord using the included clamp.•
Use the screw that is attached to the cover.•
Insert the power plug into the power outlet.
2
Connecting the LAN Cable
Attach a ferrite core to the LAN cable.
1
Make a loop near the connector of the cable.
To Next Page
Loading...
Need help?
General
