Precaution
Besides the “Safety Information” supplied with this product, please observe the following
instructions.
Installation Precautions
Installation Site
To ensure utmost safety and prevent possible malfunctions, install the machine in a
location that meets the following requirements:
A location away from curtains, etc. that may catch fire and burn easily•
A location that is not exposed to water or other liquids•
A location free from direct sunlight•
A location out of the direct airflow of an air conditioner or heater, and not• exposed to
extremely high or low temperatures
A well-ventilated location•
A location that is not exposed to high humidity•
A dust-free, or low-dust, environment.•
A location not subjected to undue vibrations•
A stable and level location•
A location where ammonia or other organic gases are not generated•
A location that does not put the operator in the direct airflow of exhaust from the •
machine
A location that is not near any kind of heating devices•
Power Source
The power source requirements are as follows.
Voltage Fluctuation: AC • 120 V ± 10 Hz
Frequency Fluctuation: Within ± 3Hz•
Use a power source with as few voltage or frequency fluctuations as possible.•
To Next Page
Loading...
Need help?
General
