Making Copies
This section describes the basic procedure for making copies. For the detailed procedure,
see the Copier Guide.
Basic Copying
Load the document, and press <Copy>.
1
For details on loading documents, refer to “Loading Documents”. (See page 1-31.)
Set the document type and contrast as necessary.
2
“Contrast”
setting key
“Doc. Type”
setting key
To set the document type, press [Doc. Type], and select the desired document type. Press •
[Enter].
To set the contrast, press [Contrast], and select the desired contrast. Press [Enter].•
Use the numeric keys to enter the number of copies.
3
You can set 1 to 99 copies.•
When the number of copies is not set, one copy will be made.•
Press <Start>.
4
To Next Page
Loading...
Need help?
General
