Loading Paper into the Bypass Tray
When you need to use a paper size that is not currently loaded in the paper cassette, or
when you want to print on an envelope, transparency film or custom sized paper, use the
bypass tray.
Only use print media specified under “ Acceptable Paper” to avoid paper jams and
print quality problems. (See page 1-23.)
Open the bypass tray on the right side of your machine. Unfold the paper
1
support extension.
To set the paper, 1) raise the flapper release lever 2) load paper until it comes to
2
a stop. Be sure to set the document with the printing side face-down.
To Next Page
Loading...
Need help?
General
