Security Function Ver. 1.01 Feb. 2017 8. Service Mode functions
25
8.4 CE Password function
• The CE password function is used to change the CE password to call the Service Mode
to the screen.
8.4.1 Setting the CE password
1. Call the Service Mode to the screen.
See P.9
2. Press the following keys in this order to display the Enhanced Security screen:
Stop → 0 → Clear
3. Touch [CE Password].
4. Type the currently used CE password from the keyboard shown on the display and
touch [END].
NOTE
• If there is a mismatch in the CE password between that currently set and that just
entered, the machine displays a message telling that the CE password entered is
wrong. Enter the correct one.
• Each time a wrong CE password is entered, the CE password illegal access count
is incremented by one.
When the access to the Service Mode has been successful with the correct CE
password entered, the CE password illegal access count is cleared and reset to 0.
To Next Page
Loading...
Need help?
General
