- When printing is carried out, the area with the exception of a 3/16 inch (4.2 mm) border around the edg-
es of the paper, is used as the printable area on all sizes of paper. When configuring a user setting of
the page size using the application, specify the paper size within the printable area so that the optimal
result is obtained.
- On an envelope, it is only possible to print on the front (address) side. Also, the result of printing on the
seal overlapping part on the front side cannot be assured. The area that cannot be assured varies de-
pending on envelope types.
- The page margin setting is determined depending on your application. If the default paper size or mar-
gin is selected, there may be some part of the paper that is not able to be printed on. To obtain the
optimal result, configure the custom size setting so that an image is included in the printable area of
this machine.
- Specify the custom size in the range of the numeric values shown in the table above using the printer
driver.
- When custom-size paper with dimensions larger than width 8-1/4 inches (210 mm) and length 11 inches
(279 mm) is used in Tray 1, trailing edges will be loaded in the bent state due to the tray structure. (Max-
imum length 11-11/16 inches (297 mm)) To load such custom-size paper, use the Manual Feed Tray
or load up to 100 sheets in Tray 1.
- In Mac OS X environment, the maximum size of the Manual Feed Tray that can be used for 2-sided
printing is "width 8-1/2 inches (216 mm) x length 14 inches (355 mm)".
4.1.3 Precautions for correct operations
Unavailable paper
Do not load the following types of paper into the tray. Not observing these precautions may lead to reduced
print quality, a paper jam, or machine damage.
- Paper that has been printed on using a heat-transfer printer or an inkjet printer
- Folded, curled, wrinkled, or torn paper
- Paper that has been left unwrapped for a long period of time
- Paper that is damp, perforated, or that has been hole punched
- Extremely smooth or extremely rough paper, or paper with an uneven surface
- Treated paper such as carbon-backed paper, thermal paper, pressure-sensitive paper, or iron-on
transfer paper
- Paper that has been decorated with foil or embossing
- Paper of a non-standard shape (paper that is not rectangular)
- Paper that is bound with glue, staples or paper clips
- Paper with labels attached
- Paper with ribbons, hooks, buttons, etc., attached
- Paper with different paper quality (roughness) on the front and back sides
- Paper that is too thin or too thick
- Paper containing static electricity
- Acidic paper
- Other types of unavailable paper
Tray 1 A4, A5, A6, B5 (JIS), B6
Letter (8-1/2 e 11), Executive (7-1/4 e 10-1/2), Invoice (5-1/2 e 8-1/2) , Govern-
ment legal (8-1/2 e 13)
16K, Kai 16, Kai 32, Postcard (100 mm e 148 mm), Reply postal card (148 mm
e 200 mm)
Photo Size 4 e 6
UK Quarto (8 e 10), Government letter (8 e 10-1/2)
Width: 3-5/8 to 8-1/2 inches (92.0 mm to 215.9 mm), Length: 5-13/16 to 11-
11/16 inches (148.0 mm to 297.0 mm)
Paper feed port Allowable sizes
To Next Page
Loading...
Need help?
General
Weight and Dimensions
