Konica Minolta CS-2000 User Manual

37
Setting
Selecting Display Format
The formats of indicating the luminance and excitation values X, Y and Z can be selected as either
normal indication to display the values to four places of decimals, or as index number indication. If
the measurement values on the LCD are unreadable, use the index number indication.
* Display format setting : Normal, Index
* Factory default setting : ****.**** [F]
* When the number of displayed digits is six (luminance and X/Y/Z are 100000 or more) in
the normal indication, “******.*****” will be displayed. In this case, the value will be
displayed if you set to the index number indication.
1. Press
MENU
key when the MEAS
screen is displayed.
The MENU screen appears.
When the backlight of the LCD has been turned
off via
BACKLIGHT
key on the MEAS screen,
the backlight is turned on.
Operation Procedure
2. Press either or key to select
[SETUP] and then press
ENTER
key.
The MENU – SETUP screen appears.
The current set contents are displayed in the
[DATA FORM] item.
3. Press either or key to select
[DATA FORM] and then press
ENTER
key.
The MENU - SETUP - DATA FORM (Display
format selection) screen appears.
OB SERVE R 2 °
DA TA FO RM F
BA CKLIG HT @ MEAS
O N
MENU
SETUP
MEAS
MEMORY
TARGET
OP TION
SETUP
MENU
MEAS SNGL
UC00
SPD
Mn
l
Ob s
2
˚
SYNC
No n
ND
No n
BL
on
LEN
S t d
cd
m
2
Lv 35. 85
0 . 3964
0 . 4059
x
y
T01
1
6, 7
2, 3, 4, 5
SETUP
MENU
DATA F
O RM
** * *
.
** * *
*
.
** * *
E
+
*

Konica Minolta CS-2000 Specifications

General

Brand	Konica Minolta
Model	CS-2000
Category	Measuring Instruments
Language	English