Security Function Ver. 1.02 Mar. 2016 8. Service Mode functions
32
8.7 HDD installation setting
• HDD installation setting sets whether the hard disk is installed or not.
• Changing the HDD installation setting from “Installed” to “Not Installed” will clear
the following types of data. Do not do that carelessly.
If the HDD installation setting is made again, be sure to make the settings again for
those that have been changed. (Have the administrator make the settings again for
the setting items of Administrator Settings.)
NOTE
• If the HDD installation setting is set to “Not Installed”, make sure to informs users
that this machine is not guaranteed by the ISO15408 evaluation.
• If the HDD installation setting is changed to “Not Installed” and then back to
“Installed” again, reusing the original hard disk will allow image files stored in the
box or secure print documents to be used. Note, however, that all boxes become
Public.
8.7.1 HDD installation setting procedure
1. Call the Service Mode to the screen.
See P.8
2. Touch [System 2].
3. Touch [HDD].
4. Touch [Installed] or [Not Installed].
5. Touch [END] and exit the Service Mode.
Item Details
Administrator Settings
Enhanced Security Mode Enhanced Security Mode is set to [OFF].
User Authentication User Authentication is set to [OFF], Public User is set to [ON],
and the following setting is set to “Restrict.”
• User Name List
• Print without Authentication
• Print Simple Auth.
Box functions It is not possible to use.
A7AHS1E009DA
To Next Page
Loading...
Need help?
General
