About Media
21
What type and amount of media can I load?
Note
Do not allow media to go above the fill limit mark inside the tray or the
media may not be fed correctly.
Media Storage
Keep media on a flat, level surface in its original wrapper until it is time to
load it.
If media has been removed from its wrapper, place it in its original packaging
and store in a cool, dark place.
When storing media, avoid
!
Moisture, excess humidity
Keep media between 30% to 65% relative humidity. Toner does not
adhere well to moist or wet paper
On the other hand, media that has been stored for a long time without
staying in its packaging may dry up too much and also cause jamming.
!
Direct sunlight
!
Excess heat (up to 35°C/95°F)
!
Dust
!
Leaning against other objects or placed in an upright position
Before purchasing a large quantity or special media, do a trial printing with
the same media and check the print quality.
Media Source/Maximum Amount Input Capacity
Media Type Tray 1
Plain Paper
60–90 g/m
2
(16–24 lb)
150 sheets
Special Media
Envelopes 10 sheets
Label sheets 10 sheets
Letter head 10 sheets
Postcards (Japanese Size) 50 sheets (first face)
20 sheets (second face)
Thick paper 91–163 g/m
2
(24–90 lb)
10 sheets
Transparencies 5 sheets
To Next Page
Loading...
Need help?
General
