To Next Page

To Previous Page

MAINTENANCE WORK ON FRAME AND ENGINE 118

B00206-10

– Mount and tighten screw .

– Check that the lighting is functioning properly.

9.56Changing the low beam bulb

Note

Damage to reflector Reduced luminance.

– Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before

mounting.

– Switch off all power consumers and switch off the engine.

B00198-10

– Remove screws .

Table of Contents5
Means of Representation9
Important Information10
View of Vehicle14
- View of Vehicle, Front Left Side (Vehicle Differs Slightly from Photo)14
- View of Vehicle, Rear Right Side (Vehicle Differs Slightly from Photo)16
Location of Serial Numbers18
- Chassis Number/Type Label18
- Key Number19
- Engine Number19
- Fork Part Number20
- Shock Absorber Part Number20
Controls21
- Clutch Lever21
- Hand Brake Lever21
- Light Switch22
- Headlight Flasher Switch22
- Turn Signal Switch23
- Horn Button23
- Ignition/Steering Lock24
- Emergency off Switch24
- Electric Starter Button25
- Combination Instrument25
- Combination Instrument - Function Buttons26
- Combination Instrument - Tachometer26
- Combination Instrument - Indicator Lamps27
- Combination Instrument - Display28
- Combination Instrument - Speedometer29
- Setting Kilometers or Miles29
- Combination Instrument - Time30
- Setting the Clock30
- Combination Instrument - ODO Display31
- Combination Instrument - Setting/Resetting TRIP 131
- Combination Instrument - Setting/Resetting TRIP 232
- Combination Instrument - TRIP F Display33
- Combination Instrument - Ambient Temperature Display33
- Setting the Temperature Units34
- Combination Instrument - Warning of Slippery Roads34
- Combination Instrument - Coolant Temperature Indicator35
- Opening the Filler Cap36
- Closing the Filler Cap37
- Seat Lock (Super Duke)38
- Seat Lock (Super Duke R)38
- Supporting Strap (Super Duke)39
- Baggage Lugs (Super Duke)39
- Tool Set40
- Helmet Lock40
- Passenger Footrests (Super Duke)41
- Shift Lever41
- Foot Brake Lever42
- Side Stand43
Tips on Putting into Operation44
- Information on First Use44
- Running in the Engine45
- Loading the Vehicle45
Riding Instructions48
- Checks before Putting into Operation48
- Starting49
- Starting up50
- Shifting, Riding51
- Braking54
- Stopping, Parking55
- Refueling57
Service Schedule59
Maintenance Work on Frame and Engine62
- Jacking up Motorcycle at the Front62
- Taking the Front from the Work Stand62
- Jacking up Motorcycle at the Rear63
- Taking the Rear from the Workstand63
- Fork/Shock Absorber64
- Adjusting the Compression Damping of the Fork64
- Adjusting the Rebound Damping of the Fork66
- Adjusting the Spring Preload of the Fork67
- Bleeding the Fork Legs68
- Compression Damping of the Shock Absorber69
- Adjusting the Low-Speed Compression Damping of the Shock Absorber69
- Adjusting the High-Speed Compression Damping of the Shock Absorber71
- Adjusting the Rebound Damping of the Shock Absorber72
- Adjusting the Spring Preload of the Shock Absorber73
- Steering Damper (Super Duke R)75
- Adjusting the Steering Damper (Super Duke R)75
- Handlebar Position (Super Duke R)76
- Adjusting the Handlebar Position (Super Duke R)76
Checking the Chain for Dirt77
Cleaning the Chain78
Checking the Chain Tension79
Adjusting the Chain Tension80
Checking the Chain, Rear Sprocket and Engine Sprocket82
Checking the Front Brake Discs84
Checking the Rear Brake Disc85
Adjusting the Basic Position of the Hand Brake Lever86
Checking the Front Brake Fluid Level86
Adding Front Brake Fluid87
Brake Linings88
Checking the Front Brake Linings89
Checking the Rear Brake Fluid Level90
Adding Rear Brake Fluid90
Checking the Rear Brake Linings92
Removing the Front Wheel93
Installing the Front Wheel94
Removing the Rear Wheel96
Installing the Rear Wheel97
Checking Rear Hub Shock Absorbers99
Checking the Tire Condition100
Checking the Tire Air Pressure102
Removing the Front Spoiler103
Installing the Front Spoiler103
Removing the Seat104
Mounting the Seat105
Seat Height (Super Duke R)106
Adjusting the Seat Height (Super Duke R)106
Mounting the Helmet Lock on the Vehicle107
Removing the Spoiler108
Installing the Spoiler109
Removing the Battery111
Installing the Battery112
Recharging the Battery113
Changing the Main Fuse115
Changing the Fuses of Individual Power Consumers117
Changing the Parking Light Bulb119
Changing the Low Beam Bulb120
Changing the High Beam Bulb122
Changing the Turn Signal Bulb125
Changing the Brake Light Bulb (Super Duke)126
Changing the Tail Light Bulbs (Super Duke)127
Changing the License Plate Lamp128
Checking the Headlight Setting131
Adjusting Headlight Range131
Cooling System132
Checking the Antifreeze and Coolant Level133
Checking the Coolant Level in the Compensating Tank135
Draining the Coolant137
Filling/Bleeding the Cooling System138
Adjusting the Basic Position of the Clutch Lever140
Checking/Correcting the Fluid Level of the Hydraulic Clutch141
Checking the Play in the Throttle Cable142
Adjusting the Play in the Throttle Cable143
Checking the Engine Oil Level143
Changing the Engine Oil and Filter, Cleaning the Oil Screens144
- Draining the Engine Oil and Filter, Cleaning the Oil Screens145
- Filling up with Engine Oil149
- Adding Engine Oil151
Engine Control Blink Code152
Troubleshooting158
Cleaning161
- Cleaning Motorcycle161
Protective Treatment for Winter Operation163
- Conserving for Winter Operation163
Storage164
- Putting into Operation after Storage165
Technical Data - Engine166
- Capacity- Engine Oil167
- Capacity - Coolant168
Technical Data - Engine Tightening Torques169
Technical Data - Chassis173
- Lighting Equipment175
- Tires176
- Capacity - Fuel176
Technical Data - Fork177
- Super Duke177
- Super Duke R178
Technical Data - Shock Absorber180
- Super Duke180
- Super Duke R181
Technical Data - Chassis Tightening Torques183
Substances186
Auxiliary Substances190

Brand	KTM
Model	2010 990 Super Duke
Category	Motorcycle
Language	English

KTM 2010 990 Super Duke User Manual

Table of Contents

Questions and Answers:

KTM 2010 990 Super Duke Specifications

Related product manuals