MAINTENANCE WORK ON FRAME AND ENGINE 66
(Super Duke R)
Spring preload - Preload Adjuster
Comfort 5 turns
Standard 5 turns
Sport 5 turns
Info
Turn clockwise to increase preload, turn counterclockwise to reduce spring
preload.
Changing the spring preload has no influence on the rebound damping although
the adjusting screws turn during the adjustment work. However, you should also
adjust the rebound damping when you alter the spring preload.
9.9Bleeding the fork legs
– Lean the motorcycle on the side stand.
B00177-10
– Remove bleeder screws briefly.
Any excess pressure escapes from the interior of the fork.
– Mount and tighten the bleeder screws.
Info
Carry out this operation on both fork legs.
To Next Page
Need help?
General
