KTM 2010 990 Super Duke User Manual (English)

To Next Page

To Previous Page

MAINTENANCE WORK ON FRAME AND ENGINE 133

B00220-10

– Check the coolant level in the radiator.

The radiator must be completely filled.

» If the coolant level does not meet specifications:

– Correct the coolant level and determine the reason for the coolant loss.

Alternative 1

Coolant ( p. 184)

Alternative 2

Coolant (mixed ready to use) ( p. 184)

» If more coolant needed to be added than the specified value:

> 0.50 l (> 0.53 qt.)

–

Fill/bleed the cooling system. x ( p. 136)

– Mount radiator cap .

– Install the spoiler. ( p. 107)

9.66Checking the coolant level in the compensating tank

Warning

Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.

– Do not remove the radiator cap, radiator hoses or other cooling system components when the engine is hot. Allow the engine

and cooling system to cool down. In case of scalding, rinse immediately with lukewarm water.

Warning

Danger of poisoning Coolant is poisonous and a health hazard.

– Avoid contact between coolant and skin, eyes and clothing. If it gets into your eyes, rinse immediately with water and contact

a doctor. Wash affected skin areas immediately with soap and water. If coolant is swallowed, contact a doctor immediately.

Change clothes that have come into contact with coolants. Keep coolant out of the reach of children.

Need help?

Do you have a question about the KTM 2010 990 Super Duke and is the answer not in the manual?

KTM 2010 990 Super Duke Specifications

General