EasyManuals Logo
Home>KTM>Motorcycle>2010 990 Super Duke

KTM 2010 990 Super Duke User Manual

KTM 2010 990 Super Duke
198 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #50 background imageLoading...
Page #50 background image
RIDING INSTRUCTIONS 48
400971-10
Press the emergency OFF switch into the position .
Switch on the ignition by turning the ignition key to the ON position.
After you switch on the ignition, you can hear the fuel pump working for about two
seconds. The function test of the combination instrument is run at the same time.
Shift the transmission to neutral.
The green idling speed indicator lamp N lights up.
Press the electric starter button .
Info
Do not press the electric starter button until the function test of the combination
instrument is finished.
When starting, DO NOT open the throttle. If you open the throttle during the start-
ing procedure, fuel is not injected by the engine management system and the
engine cannot start.
Press the starter for a maximum of 5 seconds. Wait for a least 5 seconds before
trying again.
This motorcycle is equipped with a safety start system. You can only start the
engine if the transmission is in neutral or if the clutch is pulled when a gear is
engaged. If the side stand is folded out and you shift into gear and release the
clutch, the engine stops.
Take the weight off the side stand and swing it upwards with your foot as far as it will
go.
7.3Starting up
Pull the clutch lever, engage 1st gear, release the clutch lever slowly and simultaneously open the throttle carefully.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTM 2010 990 Super Duke and is the answer not in the manual?

KTM 2010 990 Super Duke Specifications

General IconGeneral
BrandKTM
Model2010 990 Super Duke
CategoryMotorcycle
LanguageEnglish

Related product manuals