BRAKES 101
100135-10
– Check the thickness of the brake disc in several places to see if it conforms to measure-
ment .
Info
Wear reduces the thickness of the brake discs in area of the brake discs.
Brake discs - wear limit
Front 4.5 mm (0.177 in)
» If the brake disc thickness is less than the specified value:
–
Change the brake discs. x
– Check the brake discs for damage, cracking and deformation.
» If the brake discs exhibit damage, cracking or deformation:
–
Change the brake discs. x
11.4Checking the front brake fluid level
Warning
Danger of accidents Failure of the brake system.
– If the brake fluid level falls below the MIN mark, this indicates a leakage in the brake system or worn-out brake linings. Check
the brake system and do not continue riding. (Your authorized KTM workshop will be glad to help.)
Warning
Danger of accidents Reduced braking effect caused by old brake fluid.
– Change the brake fluid of the front and rear brake according to the service schedule. (Your authorized KTM workshop will be
glad to help.)
To Next Page
Loading...
Need help?
General
