ELECTRICAL SYSTEM 15
115
15.7 Changing the headlight bulb
Note
Impairments to reflectors and lamps Grease on the reflector reduces the emitted light.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
Grease residue on the bulb reduces heat dissipation and increases the heat of the bulb, thus reducing its service
life.
– Clean and degrease the bulbs before mounting.
– Do not touch the bulbs with your bare hands.
Preparatory work
– Remove the headlight mask with the headlight. ( p. 113)
I00431-10
Main work
–
Turn LED unit
1
counterclockwise all the way and take it out
of the reflector.
Guideline
Only touch the LED unit on the cooling element.
I00432-10
– Insert the LED unit into the reflector and turn it clockwise all
the way.
Headlight (LED)
Info
Ensure that O-ring
2
is seated properly.
Finishing work
– Install the headlight mask with the headlight. ( p. 114)
– Check the headlight setting. ( p. 116)
15.8 Changing the turn signal bulb (All EXC models)
Note
Impairments to reflectors and lamps Grease on the reflector reduces the emitted light.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
Grease residue on the bulb reduces heat dissipation and increases the heat of the bulb, thus reducing its service
life.
– Clean and degrease the bulbs before mounting.
– Do not touch the bulbs with your bare hands.
To Next Page
Loading...
Need help?
General
