COMBINATION INSTRUMENT 7
25
– Wait 3 - 5 seconds.
The settings are stored.
Info
If no button is pressed for 10–12 seconds, or if an
impulse comes from the wheel speed sensor, the
settings are automatically saved and the setup menu is
closed.
7.4 Adjusting combination instrument function
Info
When the vehicle is delivered, only the SPEED/H and SPEED/ODO display modes are activated.
Condition
The motorcycle is stationary.
400318-01
– Repeatedly press the button briefly until H appears at the
bottom right of the display.
– Press the button for 2–3 seconds.
The Setup menu is displayed and the active functions are
shown.
Info
If no button is pressed for 10–12 seconds, the settings
are automatically saved.
If no button is pressed for 20 seconds, or if an impulse
comes from the wheel speed sensor, the settings are
automatically saved and the setup menu is closed.
– Repeatedly press the button briefly until the desired func-
tion flashes.
The selected function flashes.
Activating the function
– Press the button .
The symbol continues to appear in the display and the
next function appears.
Deactivating a function
– Press the button .
The symbol disappears in the display and the next
function appears.
7.5 Setting the clock
Condition
The motorcycle is stationary.
To Next Page
Loading...
Need help?
General
