KTM 300 EXC TPI 2018 User Manual

6 CONTROLS
19
6.9 Turn signal switch (All EXC models)
E00902-12
Turn signal switch
1
is fitted on the left side of the handlebar.
Possible states
Turn signal off – The turn signal switch is in the cen-
tral position.
Left turn signal, on – The turn signal switch is turned
to the left.
Right turn signal, on – The turn signal switch is
turned to the right.
6.10 Electric starter button
E00824-10
The electric starter button
1
is fitted on the right side of the
handlebar.
Possible states
• Electric starter button in basic position
• Electric starter button pressed – In this position, the elec-
tric starter is actuated.
6.11 Map switch (All Six Days models)
E00859-10
The map switch
1
is fitted on the right side of the handlebar.
Possible states
• Map switch in position I – The ignition timing map Perfor-
mance is active in this position.
• Map switch in position II – The ignition timing map Soft is
active in this position.
The engine characteristic can be altered with the map switch.
Info
The map switch has no function in the homologated
(restricted) condition of the motorcycle.
6.12 Indicator lamps overview (All EXC models)
E00860-01
Possible states
The high beam indicator lamp lights up blue – The
high beam is switched on.
Malfunction indicator lamp lights up/flashes yellow
– The OBD has detected an error in the vehicle elec-
tronics. Come safely to a halt, and contact an autho-
rized KTM workshop.
The fuel level warning lamp lights up yellow – The
fuel level has reached the reserve mark.
Turn signal indicator lamp flashes green – The turn
signal is switched on.

KTM 300 EXC TPI 2018 Specifications

General

Brand	KTM
Model	300 EXC TPI 2018
Category	Motorcycle
Language	English