11 TUNING THE CHASSIS
64
11.1 Adjusting the spring preload of the shock absorber
Warning
Danger of accidents Modifications to the suspension setting may seriously alter the handling characteris-
tic.
– Ride slowly to start with after making adjustments to get the feel of the new handling characteristic.
Info
The spring preload defines the initial status of the spring operation on the shock absorber.
The best spring preload setting is achieved when it is set for the weight of the rider and that of any lug-
gage and a passenger, thus ensuring an ideal compromise between handling and stability.
T04633-01
–
Adjust the spring preload by turning adjusting ring
1
.
Guideline
Spring preload
Standard 11 mm (0.43 in)
Hook wrench, shock absorber (90529077000)
Extension for hook wrench (90129099025)
Info
The spring preload can be set to 10 different positions.
11.2 Adjusting the shift lever
Info
The adjustment range of the shift lever is limited.
A01450-10
–
Loosen nuts
1
.
–
Adjust the shift lever by turning shift rod
2
.
Guideline
Shift rod adjustment
range
A
90 … 102 mm (3.54 …
4.02 in)
Info
Make the same adjustments on both sides.
At least five screw threads must be screwed into the
seating.
–
Check adjusting angle
B
.
Guideline
Adjusting angle
B
shift rod
- bell crank - shift lever
90°
–
Tighten nuts
1
.
To Next Page
Loading...
Need help?
General
