ELECTRICAL SYSTEM 15
91
W00555-10
Main work
–
Turn adjusting screw
1
to adjust the headlight range.
Info
Turn clockwise to increase the headlight range; turn
counterclockwise to reduce the headlight range.
If you have a payload, you may have to correct the
headlight range.
Screw
1
also secures the headlight. Ensure the screw
is always screwed in far enough.
400726-11
–
Set the headlight to marking
B
.
Guideline
The light-dark boundary must lie exactly on lower mark-
ing
B
when the motorcycle is ready to operate with the
rider mounted along with any luggage and a passenger if
applicable.
15.9 Diagnostics connector
H06138-10
Diagnostics connector
1
is located under the seat.
15.10 Front ACC1 and ACC2
A01476-10
Installation location
–
The ACC1
1
and ACC2
2
power supplies are located on
the right of the vehicle at the front, behind the steering head
cover.
To Next Page
Loading...
Need help?
General
