15 ELECTRICAL SYSTEM
118
15.6 Removing the headlight mask with the headlight
V00458-10
– Press and hold the kill switch while the engine is idling until
the engine stops.
– Detach the brake line and wiring harness from the headlight
mask.
–
Release rubber bands
1
. Slide the headlight mask up and
swing it forward.
S01328-10
–
Detach plug-in connectors
2
and take off the headlight mask
with the headlight.
15.7 Installing the headlight mask with the headlight
S01328-11
Main work
–
Connect plug-in connectors
1
.
V00458-11
–
Position the headlight mask and fix it with rubber bands
2
.
The holding lugs engage in the fender.
– Position the brake line and wiring harness in the brake line
guide.
Finishing work
– Check the headlight setting. ( p. 119)