SERVICE WORK ON THE ENGINE 18
137
Finishing work
(EXC‑F Six Days, EXC‑F AU)
– Install the engine guard. ( p. 94)
– Check the engine oil level. ( p. 134)
18.4 Adding engine oil
Info
Too little engine oil or poor-quality engine oil will result in premature wear of the engine.
H01712-10
Main work
–
Remove oil filler plug
1
with the O-ring from the clutch
cover.
–
Fill engine oil to the middle
A
of the level viewer.
Engine oil (SAE 10W/50) ( p. 155)
Info
For optimal performance of the engine oil, do not mix
different types of engine oil.
We recommended changing the engine oil when neces-
sary.
– Mount and tighten the filler plug together with the O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
– Always make sure there is sufficient ventilation
when running the engine.
– Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
– Start the engine and check that it is oil-tight.
Finishing work
– Check the engine oil level. ( p. 134)
To Next Page
Loading...
Need help?
General
