23 TECHNICAL DATA
150
23.4 Chassis
Frame Central tube frame made of chrome molybdenum steel
tubing
Fork (EXC‑F EU/AU) WP SuspensionXplor 48
Fork (EXC‑F Six Days) WP SuspensionXplor 48 PA
Suspension travel
front 300 mm (11.81 in)
rear 310 mm (12.2 in)
Fork offset 22 mm (0.87 in)
Shock absorber WP Suspension 5018 PDS DCC
Brake system Disc brakes, brake calipers on floating bearings
Brake discs - diameter
front 260 mm (10.24 in)
rear 220 mm (8.66 in)
Brake discs - wear limit (EXC‑F EU/AU)
front 2.5 mm (0.098 in)
rear 3.5 mm (0.138 in)
Brake discs - wear limit (EXC‑F Six Days)
front 2.5 mm (0.098 in)
rear 3.7 mm (0.146 in)
Tire air pressure off road
front 1.0 bar (15 psi)
rear 1.0 bar (15 psi)
Road tire pressure
front 1.5 bar (22 psi)
rear 1.8 bar (26 psi)
Final drive (All 450 models) 14:52 (13:52)
Final drive (All 500 models) 14:50 (13:50)
Chain 5/8 x 1/4"
Rear sprockets available 48, 50, 52
Steering head angle 63.5°
Wheelbase 1,482 ± 10 mm (58.35 ± 0.39 in)
Seat height unloaded 960 mm (37.8 in)
Ground clearance unloaded 355 mm (13.98 in)
Weight without fuel, approx. (450 EXC‑F EU/AU) 106 kg (234 lb.)
Weight without fuel, approx. (500 EXC‑F EU/AU,
450 EXC‑F Six Days EU)
106.5 kg (234.8 lb.)
Weight without fuel, approx. (500 EXC‑F Six Days EU) 107 kg (236 lb.)
Maximum permissible front axle load 145 kg (320 lb.)
Maximum permissible rear axle load 190 kg (419 lb.)
Maximum permissible overall weight 335 kg (739 lb.)
To Next Page
Loading...
Need help?
General
