KTM 505 SX ATV User Manual

MAINTENANCE ON CHASSIS AND ENGINE 138
301838-10
– Remove the radiator cap . Completely drain the coolant.
– Mount screw  with a new seal and tighten it.
Guideline
Screw, water pump cover M6 10 Nm (7.4 lbf ft)
– Mount screw  with a new seal and tighten it.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
9.84Filling coolant/bleeding the cooling system x
Warning
Danger of poisoning Coolants are poisonous and a health hazard.
– Avoid contact between coolants and skin, eyes and clothing. If fuel gets into your eyes, rinse immediately with water and con-
tact a doctor. Wash affected skin areas immediately with soap and water. If coolant is swallowed, contact a doctor immediately.
Change clothes that have come into contact with coolants. Keep coolants out of the reach of children.
– Remove the front trim. ( p. 123)
– Remove the radiator spoiler. ( p. 120)

KTM 505 SX ATV Specifications

General

Brand	KTM
Model	505 SX ATV
Category	Offroad Vehicle
Language	English