KTM 505 SX ATV User Manual

MAINTENANCE ON CHASSIS AND ENGINE 71
Info
The toe is the difference in length between distances  and  by which the wheels are spaced at the front or rear when driv-
ing straight ahead. The distance is measured at the height of the wheel center from rim flange to rim flange.
– Tighten nuts  and .
Guideline
Lock nut, tie rod, outside M12x1.25 20 Nm (14.8 lbf ft)
Lock nut, tie rod, inside M12LHx1.25 20 Nm (14.8 lbf ft)
Info
The tie rods  must still be freely movable.
9.18Checking/adjusting the camber x
Info
The left and right camber should have the same settings.
The operations are the same on the left and right.
– Jack up the vehicle. ( p. 50)

KTM 505 SX ATV Specifications

General

Brand	KTM
Model	505 SX ATV
Category	Offroad Vehicle
Language	English