MAINTENANCE ON CHASSIS AND ENGINE 147
301842-10
– Loosen screw plug by striking it lightly with a hammer a few times.
– Remove screw plug with oil screen and the O-rings.
– Drain the remaining engine oil.
– Thoroughly clean parts and sealing area.
– Mount and tighten screw plug with oil screen and the O-rings.
Guideline
Plug, oil screen M32x1.5 30 Nm
(22.1 lbf ft)
9.92Removing the oil filter x
Warning
Danger of scalding Engine oil and gear oil get very hot when the vehicle is driven.
– Wear suitable protective clothing and gloves. If you scald yourself, hold the affected area under lukewarm water immediately.
Warning
Environmental hazard Hazardous substances cause environmental damage.
– Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
– Place a suitable container under the engine.
To Next Page
Loading...
Need help?
General
