RIDING INSTRUCTIONS 42
Alternative 1
Switch off the engine using the kill switch.
– Press kill switch at engine idle speed until the engine stops. (Figure 301777-10 p. 22)
Alternative 2
Switch off the engine using the emergency OFF switch with a rip cord.
– Pull off clip . (Figure 301777-10 p. 22)
7.14Stopping, parking
Warning
Danger of burns Some vehicle components get very hot when the vehicle is in use.
– Do not touch hot components such as exhaust system, radiator, engine, shock absorber and brakes. Allow these components to
cool down before starting work on them.
Note
Danger of damage Danger of damage from accidental rolling of vehicle.
– Park the vehicle on a surface that is as horizontal as possible and activate the parking brake.
Note
Fire hazard Some vehicle components get very hot when the machine is driven.
– Do not place the vehicle where there are flammable or explosive substances. Do not place objects over the vehicle while it is still warm
from being run. Always let the vehicle cool first.
To Next Page
Loading...
Need help?
General
