KTM 505 SX ATV User Manual

MAINTENANCE ON CHASSIS AND ENGINE 63
Tip
Before changing the spring preload, make a note of the present setting, e.g., by measuring the length of the spring.
–
Remove the rear shock absorber. x ( p. 64)
– After removing the shock absorber, clean it thoroughly.
200601-01
– Loosen lock ring . Hold adjusting ring  while doing so. Suitable tools are available
from an authorized KTM workshop.
Hook wrench (83019002000)
– Turn the adjusting ring until the spring pack is fully unloaded.

KTM 505 SX ATV Specifications

General

Brand	KTM
Model	505 SX ATV
Category	Offroad Vehicle
Language	English