KTM 85 SX 17/14 User Manual

15 TUNING THE ENGINE 72
15.6 Checking the basic position of the shift lever
400692-10
– Sit on the vehicle in the riding position and determine distance A between the
upper edge of your boot and the shift lever.
Distance between shift lever and upper
edge of boot
10… 20 mm (0.39… 0.79 in)
» If the distance does not meet specifications:
–
Adjust the basic position of the shift lever. x ( p. 72)
15.7 Adjusting the basic position of the shift lever x
C00277-10
– Remove screw 1 and take off shift lever 2.
C00276-10
– Clean gear teeth A of the shift lever and shift shaft.
– Mount the shift lever on the shift shaft in the required position and engage the
gearing.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any other vehicle compo-
nents during the shift procedure.
– Mount and tighten screw 1.
Guideline
Screw, shift lever M6 12 Nm
(8.9 lbf ft)
Loctite
®
243™

KTM 85 SX 17/14 Specifications

General

Brand	KTM
Model	85 SX 17/14
Category	Motorcycle
Language	English