KTM 990 SUPERMOTO 2008 User Manual

Replacing the brake light and taillight bulbs
Remove the seat.Remove the screws from the handrails [1], rear side parts [2] and rear top
part [3] and remove the parts.
BULBS FOR THE TAILLIGHT:
Remove the bulb socket [5] from the housing and pull the bulb out of the socket. Insert a
new bulb and press the bulb socket all the way into the taillight housing.
Mount the rear side parts and tighten the screws.Mount the rear top part and tighten the
screws. Mount the handrails and tighten the screws to 25 Nm. Mount the seat.
MAINTENANCE WORK ON CHASSIS AND ENGINE »
59
1
2
4
5
5
3
BULB FOR BRAKE LIGHT:
Turn the bulb socket [4] approx. 30° in a counterclockwise direction and pull it out of the
taillight housing. Slightly press in the bulb, turn approx. 30° in a counterclockwise direc-
tion and remove it from the socket.
Proceed in the reverse order to mount a new bulb.

KTM 990 SUPERMOTO 2008 Specifications

General

Brand	KTM
Model	990 SUPERMOTO 2008
Category	Motorcycle
Language	English