TROUBLESHOOTING »
70
If you let the specified maintenance work on your motorcycle be carried out, disturbances can hardly be expected. Should an error occur
nevertheless, we advise you to use the trouble shooting chart in order to find the cause of error. We would like to point out that many oper-
ations cannot be performed by oneself. In case of uncertainty, please contact an authorized KTM workshop.
TROUBLE CAUSE REMEDY
Engine does not start when the
starter button is actuated
Operating errror
Discharged battery
Blown fuse
Blown main fuse
Defect ignition lock or emergency
OFF switch
Defect safe-starting system
No functional key
Turn on the ignition, switch the gear to neutral and switch
the emergency OFF switch on, do not accelerate while start-
ing the engine
Recharge the battery and investigate the causes for discharg-
ing; contact an authorized KTM workshop
Replace fuse IGNITION/FUEL PUMP
Remove the seat and replace the main fuse in the starter relay
Check ignition lock and emergency OFF switch, contact an
authorized KTM workshop
Contact an authorized KTM workshop.
Program key (refer to Reordering and programming keys)
The engine cranks only with pulled
clutch lever
A gear is engaged
A gear is engaged and the side
stand is still folded down
Defect safe-starting system
Shift the transmission to neutral
Shift the transmission to neutral
Contact an authorized KTM workshop
Engine cranks with gear engaged Defect safe-starting system Contact an authorized KTM workshop
To Next Page
Loading...
