To Next Page

To Previous Page

MAINTENANCE WORK ON FRAME AND ENGINE 116

9.40Mounting the helmet lock on the vehicle

Warning

Danger of accidents Impairment of ride behavior and vehicle operation if a helmet or helmet lock is attached to the vehicle.

– Do not use the helmet lock for holding a helmet or other objects during the journey. Always remove the helmet lock before start-

ing out.

700561-10

– Remove the seat. ( p. 115)

– Position the steel cable from the tool set with one loop on the lug .

Steel cable (60012015000)

– Guide the steel cable through the helmet opening.

– Then position the free loop of the steel cable on the lug.

– Position the helmet carefully on the side of the vehicle.

– Mount the seat. ( p. 115)

9.41Removing the battery x

Warning

Risk of injury Battery acid and battery gases cause serious cauterization.

– Keep batteries out of the reach of children.

– Wear suitable protective clothing and goggles.

– Avoid contact with battery acid and battery gases.

– Keep the battery away from sparks or open fire. Charge only in well ventilated rooms.

– In the event of skin contact, rinse with large amounts of water. If battery acid gets in the eyes, rinse with water for at least 15

minutes and contact a doctor.

Questions and Answers:

Need help?

Do you have a question about the KTM 990 Supermoto R and is the answer not in the manual?

KTM 990 Supermoto R Specifications

General