MAINTENANCE WORK ON FRAME AND ENGINE 159
700632-10
– Position the mask spoiler.
– Mount and tighten screws .
700634-10
– Mount and tighten screws .
– Repeat the operation on the opposite side.
9.64Adjusting the basic position of the clutch lever
Info
Turn the adjusting screw clockwise to increase the distance between the clutch lever and the handlebar.
Turn the adjusting screw counterclockwise to decrease the distance between the clutch lever and the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Do not make any adjustments while riding!
To Next Page
Loading...
Need help?
General
