STORAGE 188
Info
Do not use non-porous materials since they prevent humidity from escaping, thus causing corrosion.
Avoid running the engine for a short time only. Since the engine cannot warm up properly, the water vapor produced during
combustion condenses and causes valves and exhaust system to rust.
15.2Putting into operation after storage
– Take the front from the work stand. ( p. 75)
– Take the rear from the work stand. ( p. 76)
–
Recharge the battery. x ( p. 119)
–
Install the battery. x ( p. 118)
– Set the clock. ( p. 46)
– Refuel. ( p. 70)
– Carry out checks before putting into operation. ( p. 61)
– Take a test ride.
To Next Page
Loading...
Need help?
General
