To Next Page

To Previous Page

TECHNICAL DATA - ENGINE TIGHTENING TORQUES 191

Hose clip, intake flange M4 1.5 Nm (1.11 lbf ft) –

Oil jet M4 6 Nm (4.4 lbf ft)

Loctite

243™

Remaining engine screws M5 6 Nm (4.4 lbf ft) –

Screw, bearing retainer M5 6 Nm (4.4 lbf ft)

Loctite

243™

Screw, connecting angle on valve cover M5 3 Nm (2.2 lbf ft)

Loctite

243™

Screw, gear sensor M5 3 Nm (2.2 lbf ft)

Loctite

243™

Screw, locking lever M5 6 Nm (4.4 lbf ft)

Loctite

243™

Nut, cylinder head M6 8 Nm (5.9 lbf ft) –

Plug, vacuum connection M6 5 Nm (3.7 lbf ft)

Loctite

243™

Remaining engine screws M6 10 Nm (7.4 lbf ft) –

Screw in alternator cover M6 10 Nm (7.4 lbf ft) –

Screw, bearing bolt in alternator cover M6 10 Nm (7.4 lbf ft)

Loctite

243™

Screw, camshaft bearing support M6 10 Nm (7.4 lbf ft) –

Screw, clutch cover M6 10 Nm (7.4 lbf ft) –

Screw, clutch spring M6 10 Nm (7.4 lbf ft) –

Screw, engine case M6 10 Nm (7.4 lbf ft) –

Screw, freewheel holder M6 10 Nm (7.4 lbf ft)

Loctite

243™

Screw, freewheel ring M6 13 Nm (9.6 lbf ft)

Loctite

648™

Screw, oil pump housing M6 10 Nm (7.4 lbf ft)

Loctite

243™

Screw, pulse generator M6 10 Nm (7.4 lbf ft)

Loctite

243™

Screw, shift drum locating M6 10 Nm (7.4 lbf ft)

Loctite

243™

Screw, shift lever M6 10 Nm (7.4 lbf ft)

Loctite

243™

Screw, starter motor M6 10 Nm (7.4 lbf ft) –

Screw, stator M6 10 Nm (7.4 lbf ft)

Loctite

243™

Questions and Answers:

Need help?

Do you have a question about the KTM 990 Supermoto R and is the answer not in the manual?

KTM 990 Supermoto R Specifications

General

Engine Type	V-twin, 4-stroke
Displacement	999 cc
Transmission	6-speed
Seat Height	875 mm
Dry Weight	191 kg
Bore x Stroke	101 mm x 62.4 mm
Compression Ratio	11.5:1
Fuel System	Electronic Fuel Injection
Cooling System	Liquid cooled
Front Suspension	WP USD 48mm
Rear Suspension	WP monoshock
Front Tire	120/70 ZR 17
Rear Tire	180/55 ZR 17
Wheelbase	1505 mm
Starter	Electric
ABS	Optional
Torque	97 Nm
Rear Brake	Single 240 mm disc
Frame	Chromoly trellis
Front Brake	2 x 305 mm discs