MAINTENANCE WORK ON FRAME AND ENGINE 151
700627-10
– Place a suitable container under the radiator.
– Remove radiator cap .
– Remove screw .
– Completely drain the coolant.
– Mount screw with a new seal ring and tighten it.
Guideline
Remaining chassis screws M6 10 Nm (7.4 lbf ft)
700628-10
– Place a suitable container under the engine.
– Remove screw .
– Completely drain the coolant.
– Mount screw with a new seal ring and tighten it.
Guideline
Screw, water pump cover M6 10 Nm (7.4 lbf ft)
9.59Filling/bleeding the cooling system x
Warning
Danger of poisoning Coolant is poisonous and a health hazard.
– Avoid contact between coolant and skin, eyes and clothing. If it gets into your eyes, rinse immediately with water and contact
a doctor. Wash affected skin areas immediately with soap and water. If coolant is swallowed, contact a doctor immediately.
Change clothes that have come into contact with coolants. Keep coolant out of the reach of children.
To Next Page
Loading...
Need help?
General
