CONTROLS 51
5.28Opening the filler cap
302079-10
– Lift the cover of the filler cap and insert the ignition key.
Note
Danger of damage Ignition key breakage.
– To take pressure off of the ignition key, push down on the filler cap. Damaged igni-
tion keys must be replaced.
– Turn the ignition key 90° counterclockwise and remove the filler cap.
Info
The filler cap has a tank air vent system.
5.29Closing the filler cap
700554-01
– Put the filler cap back on and turn the ignition key 90° clockwise.
– Remove the ignition key and fold down the cover.
To Next Page
Loading...
Need help?
General
