MAINTENANCE WORK ON FRAME AND ENGINE 168
700611-10
– Mount oil drain plug with the magnet and new seal ring and tighten.
Guideline
Oil drain plug with magnet M22x1.5 35 Nm
(25.8 lbf ft)
700616-10
– Slide oil sieve into the engine case with the TOP marking facing up.
– Check the form ring in cover for damage and correct seating.
– Position the cover. Mount and tighten the screws.
Guideline
Screw, clutch cover M6 10 Nm (7.4 lbf ft)
9.71Filling up with engine oil x
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
To Next Page
Loading...
Need help?
General
