To Next Page

To Previous Page

MAINTENANCE WORK ON FRAME AND ENGINE 169

700619-10

– The oil must be added in two steps.

Engine oil 3.80 l

(1.004 US gal)

External

temperature:

≥ 0 °C (≥ 32 °F)

Engine oil

(SAE 10W/50)

( p. 207)

External

temperature:

< 0 °C (< 32 °F)

Engine oil (SAE

5W/40) ( p. 207)

– Remove plug  and add engine oil to the top marking .

– Mount the plug.

Danger

Danger of poisoning Exhaust gases are poisonous and inhaling them may result

in unconsciousness and/or death.

– When running the engine, always make sure there is sufficient ventilation,

and do not start or run the engine in an enclosed space without an effective

exhaust extraction system.

– Start the engine and run it until it reaches operating temperature.

Six bars of the temperature display light up.

– Check the lubrication system for leaks.

– Switch off the engine.

– Park the motorcycle on a horizontal surface in a vertical position (not on the side

stand).

– Remove the plug.

– Add engine oil to the top marking .

– Mount the plug.

Questions and Answers:

Need help?

Do you have a question about the KTM 990 Supermoto R and is the answer not in the manual?

KTM 990 Supermoto R Specifications

General