8 COMBINATION INSTRUMENT
80
8.16 Setting the clock
Info
The time is displayed in 24-hour format.
The time must be reset if the 12-V battery was disconnected from the vehicle or the fuse was removed.
Condition
The motorcycle is stationary.
F01455-10
– Press the MODE button briefly and repeatedly until ODO appears
on the display.
– Press the MODE button and SET button simultaneously for 5
seconds.
The time display begins to flash.
Info
The clock can be set in the ODO display for each menu
by keeping the MODE button and SET button pressed
simultaneously.
– Set the hours display using the MODE button.
– Set the minutes display using the SET button.
– Press the MODE button and SET button simultaneously.
The set time is adopted and saved.
To Next Page
Loading...
Need help?
General
