G GENERAL
B1700·B2100·B2400
WSM,11770
[4] HANDLING PRECAUTIONS
FOR
ELECTRICAL
PARTS
AND
WIRING
Disconnect negative
terminal first
C079F001
Install on positive
terminal first
To
ensure safety and
prevent
damage
to
the
machine and
surrounding
equipment,
heed
the
following precautions in handling electrical parts
and wiring.
III IMPORTANT
•
Check
electrical wiring
for
damage and loosened
connection every year.
To
this end, educate the
customer
to
do his or her
own
check and
at
the
same
time
recommend
the
dealer
to
perform
periodic
check
for
afee.
• Do
not
attempt
to
modify
or
remodel
any
electrical parts and wiring.
• When removing the battery cord, disconnect the
negative wire first. When installing the battery
cord, connect the positive wire first.
III Wiring
• Securely
tighten
wiring
terminals.
•
Do
not let wiring contact dangerous part.
INCORRECT
INCORRECT
CORRECT
C079F002
C079F003
• Repair
or
change torn or aged wiring immedi-
ately.
• Securely insert grommet.
CORRECT
INCORRECT
C079F005
C079F006
G-4
To Next Page
Loading...
Need help?
General
