Kubota B1700 User Manual

III IMPORTANT
• After reassembling the fan belt, be sure to adjust the fan
belt tension.
Dynamo,
Fan Belt and Muffler
1. Remove the dynamo (1) (or alternator) and fan belt (2).
2. Remove the cooling fan (3) and fan pulley.
(When reassembling)
• Check to see that there are no cracks on the belt surface.
B1700·B2100·B2400 WSM,11770
DISASSEMBLING AND ASSEMBLING
(1) Cylinder Head and Valve
(1) Dynamo
(2)
Fan Belt
(3) Cooling Fan
1 ENGINE
Head Cover
1. Remove the head cover (1).
(When reassembling)
• Check to see if the head cover gasket is not defective.
6.9 to 8.8 N'm
Tightening torque
Head cover
cap nut
0.7
to 0.9 kgf'm
5.1 to 6.5 ft-Ibs
(1) Head Cover
Injection Pipes
1. Loosen the screws on the pipe clamps.
2. Detach the injection pipes (1).
(When reassembling)
• Send compressed air into the pipes to blowout dust.
Then, reassemble
the pipes in the reverse order.
24.5 to 34.3 N'm
Tightening torque
Retaining nuts
2.5 to 3.5 kgf'm
18.1 to 25.3 ft-Ibs
1-519
WWW.PlanDeGraissage.ORG

Kubota B1700 Specifications

General

Brand	Kubota
Model	B1700
Category	Tractor
Language	English