Kubota B2778 - Storage

MAINTENANCE
OM 0361BR-AC 26
STORAGE
Before storing the subframe or rotary
broom, certain precautions should be taken
to protect it from deterioration.
1. Clean the subframe and rotary broom
thoroughly.
2. Make all the necessary repairs.
3. Replace all safety signs that are damaged,
lost, or otherwise become illegible. If a part
to be replaced has a sign on it, obtain a
new safety sign from your dealer and
install it in the same place as on the
removed part.
4. Repaint all parts from which paint has worn
or peeled.
5. Lubricate the subframe and rotary broom
as instructed under "Lubrication" section.
6. When the subframe and rotary broom are
dry, oil all moving parts. Apply oil to all
surfaces to protect against rust.
NOTE
: Do not allow any oil or grease on
the broom bristles.
7. Store in a dry place.
8. If rotary broom has hydraulic components,
install protective plugs and caps on the
quick couplers.
9. Place the rotary broom on its parking
stands, to avoid the bristles from touching
the ground.
10. If the broom bristles are exposed to direct
sunlight, cover the broom with a tarp.