1-S25
GL6000, GL7000, GL9000, GL11000, WSM
ENGINE
[2] PREPARATION
(1) Separating Engine
Draining Coolant
• Do not remove the radiator cap while operating or
immediately after stopping. Otherwise, hot water will spout
out from the radiator. Wait for more then 10 minutes to cool
the radiator, before opening the cap.
1. Place a vessel underneath the water drain plug (1).
2. Open the water drain plug (1), and remove the radiator cap to
completely drain the coolant.
3. After all coolant is drained, close the water drain plug (1).
Refer to "4. LUBRICANTS, FUEL AND COOLANT" (G-9).
W1023465
Draining Engine Oil
• Be sure to stop the engine before draining the engine oil.
1. After warming up, stop the engine.
2. Place an oil pan underneath the oil drain plug (1).
3. Open the oil drain plug (1), and remove the oil filler cap to
completely drain the engine oil.
4. After all engine oil is drained, close the oil drain plug (1).
Refer to "4. LUBRICANTS, FUEL AND COOLANT" (G-9).
W1023464
(1) Water Drain Plug [A] GL6000, GL7000
[B] GL9000, GL11000
(1) Oil Drain Plug [A] GL6000, GL7000
[B] GL9000, GL11000
To Next Page
Loading...
Need help?
General
