Kubota K008-3 User Manual

Maintenance
W9212-8235-4
03/2019
101
Replacing the engine oil and oil filter
The engine oil change must be carried out while the engine is warm.
Caution: the engine oil and the oil filter are very hot → risk of scalding!
Place an oil pan with a capacity of about 5 L under the engine oil drain. The engine oil should not
be allowed to seep into the earth and it must be discarded like the oil filter in accordance with the
applicable environment protection regulations.
 Open the engine compartment cover (page 89).
Draining the engine oil
 Remove the oil drain plug (1) and let the engine oil drain
into the oil drain pan. Install the oil drain plug using a new
seal.
Replacing the oil filter
 Place an oil drain pan under the oil filter and remove the oil
filter (1) with a filter wrench by turning it anticlockwise.
 Coat the sealing ring of the new oil filter with engine oil.
 Install and tighten the oil filter by hand. Do not use the filter
wrench.

Kubota K008-3 Specifications

General

Brand	Kubota
Model	K008-3
Category	Excavators
Language	English