Description of the excavato
36
W9212-8235-4
03/2019
Specifications
Following are the specifications for these series.
KUBOTA Excavator
Model name K008-3 U10-3
Type Rubber crawler Rubber crawler
Machine weight* kg 830 970
Operating weight** kg 905 1045
Bucket
Volume m³ 0.022 0.024
Width mm 350 380
Engine
Type Water-cooled three-cylinder diesel engine
Model name D722-E4-BH-2EU D722-E4-BH-3EU
Displacement cm³ 719 719
Engine performance
ISO 9249
kW 7.5 7.5
Rated speed 1/min 2050 2050
CO
2
emission***
(Engine family HKBXL.778KCB)
g/kWh 1019.8 1019.8
Performance
Swivel speed (swivel
frame)
1/min 8.3 8.3
Vehicle speed
fast
km/h
- 4.0
slow
km/h
2.0 2.0
Ground pressure
(without operator)
kPa
(kgf/cm²)
22.5 (0.23) 24.5 (0.25)
Climbing performance
%
(degrees)
27 (15) 27 (15)
max. lateral sway
%
(degrees)
18 (10) 18 (10)
Dozer width x height mm 700x200 860x200 750x200 990x200
Swing angle of the
boom
Left
rad
(degrees)
0.96 (55) 0.96 (55)
Right
rad
(degrees)
1.05 (60) 0.96 (55)
Auxiliary port
max. volume
(theoretical)
L/min 21 21
max. pressure
MPa 16.7 17.7
bar 167 177
Volume of the fuel reservoir l 12 12
Pulling capacity at the towing eye N 35300 35300
Vertical load at the towing eye N 4100 4100
Noise level
LpA dB (A) 77 77
LwA (2000/14/EC) dB (A) 90 90
Vibration****
Hand-arm
system
(ISO 5349-2:2001)
Digging m/s² RMS < 2.5 < 2.5
Levelling m/s² RMS < 2.5 < 2.5
Driving m/s² RMS < 2.5 2.9
Idling m/s² RMS < 2.5 < 2.5
Whole body
(ISO 2631-1:1997)
Digging m/s² RMS < 0.5 < 0.5
Levelling m/s² RMS < 0.5 < 0.5
Driving m/s² RMS 0.85 1.21
Idling m/s² RMS < 0.5 < 0.5
* With original KUBOTA bucket 17.5 kg, ready for operation.
** Machine weight incl. operator 75 kg.
*** The CO
2
measurement is based on the check carried out for an engine representative of the engine
family, using a designated check cycle under laboratory conditions. The specifications do not implicate or
guarantee the performance of a given engine.
To Next Page
Loading...
Need help?
General
