Operation
W9212-8235-4
03/2019
65
Approach overhangs and edges of ditches carefully as they
could cave in.
Drive slowly downhill, do not allow the vehicle speed to
increase uncontrollably.
When driving, the bucket should be approx. 200 to 400 mm
(A) above the ground (see figure).
Raise the dozer blade to the top position by pulling the
dozer control lever (1) back.
Select an appropriate engine speed.
Adjusting the track width of the K008-3
For models with extendable track width, adjust the desired track
width prior to operation. To do this:
Move the selector lever for the dozer/extendable track width
(1) fully to the right (figure position
).
To change the track width, both track width cylin-
ders need to be either fully extended (standard
track width) or retracted (narrow track width).
To Next Page
Loading...
Need help?
General
