Operation
W9212-8235-4
03/2019
83
Placing out of operation
Park the excavator in such a way that it can not
move and is secured against unauthorised use.
Drive the excavator on level ground. The machine should
be parked under a roof.
All hydraulic cylinders have to be extended half way (see
figure), the boom has to be in line with the excavator, the
dozer has to be lowered to the ground and the extendable
track width has to be set to standard track width.
Lock the swivel frame and the control levers (page 24, 25).
Reduce the engine speed to idle speed and let the engine
run for approx. 5 minutes to let it cool down.
Turn the starter switch (1) to the STOP position, remove the
key. The key must remain with the operator.
Unbuckle the seat belt.
Check the excavator for external damage and for leaks. Any
defects must be repaired before the next start.
In case of a heavy accumulation of dirt in the area of the
tracks and the hinges at the front attachments, clean the
excavator (page 99).
Refuel the excavator, if necessary (page 87).
Working light
The starter switch is in the RUN position.
Press the working light button (1). Both the working lights
and the instrument lighting are turned on.
Press the button again to switch off.
During work on public roads other road users must
not be blinded.
To Next Page
Loading...
Need help?
General
