OPERATION
OM 0297SB-AU
25
K.R.A. System Override Mode
(For T60 series and T70 series lawn
tractors equipped with K.R.A. system)
CAUTION : To avoid serious personal
injury: Before and when backing, look down
and behind the machine to be sure no
bystanders, especially children, have
entered the area.
NOTE: K.R.A. System override switch allows
the operator to mow or operate attachments
while in reverse if the operator deems it
absolutely necessary and safe to do so (i.e. the
operator should make sure that no bystanders,
especially children, have entered the area.)
If the owner does not wish certain operators to
utilize the override switch allowing mowing or
implement operation in reverse, then he or she
may remove the fuse from the system to
prevent override.
1. Start the engine.
2. Set the throttle to the "FAST" position.
3. Push the PTO lever to the "ENGAGED"
position.
4. Stop the machine (set the speed control
pedal to NEUTRAL) or depress the speed
control pedal forward.
5. Push the K.R.A. System override switch.
6. Look down and behind the machine to be
sure that no bystanders, especially children
have entered the area.
7. Depress the speed control pedal with the
heel of your right foot to move in the reverse
direction.
NOTE: Refer to your tractor operator's manual
for more detailed information.
1
K.R.A. s
stem switch