Kubota T2290KWT-AU User Manual

IMPORTANT :
• Check the following tests before operating the
machine.
Test 1 (operator on the seat)
1. Depress the brake pedal fully.
2. Engage the PTO switch.
3. Turn the key switch to the “START” position.
4. The engine should not crank.
Test 2 (operator on the seat)
1. Disengage the PTO switch.
2. Release the brake pedal.
3. Turn the key to “START” position.
4. The engine should not crank.
2. Checking OPC system
The OPC (Operator Presence Control) system in your
machine is designed to protect you while operating.
Check the OPC system periodically. It is recommended
to check the OPC system before daily operation.
WARNING
To avoid serious injury or death:
• Do not allow anyone near the machine while
testing.
• If the machine does not pass one of the
following tests, do not operate the machine.
Consult your local KUBOTA Dealer.
• Sit on operator's seat for all tests.
IMPORTANT :
• Check the following tests before operating the
machine.
Test 1 (operator on the seat)
1. Start and run the engine at half throttle.
2. Engage the PTO switch.
3. Stand up. (Do not get off the machine.)
4. Engine should shut off.
Test 2 (operator on the seat)
1. Start and run the engine at half throttle.
2. Disengage PTO switch.
3. Release the brake pedal.
4. Stand up. (Do not get off the machine.)
5. Engine should shut off.
3. Checking PTO control system
The PTO control system in your machine is designed to
protect you while operating. Check the PTO control
system periodically - daily is best - to test function of
the PTO control system before operation.
WARNING
To avoid serious injury or death:
• Do not allow anyone near the machine while
testing.
• If the machine does not pass one of the
following tests, do not operate the machine.
Consult your local KUBOTA Dealer.
• Sit on operator's seat for all tests.
IMPORTANT :
• Check the following tests before operating the
machine.
KUBOTA reverse awareness system
(KRA system) Test 1 (operator on the seat)
1. Start and run the engine at half throttle.
2. Engage the PTO switch.
3. Press slightly on reverse side of speed control
pedal.
4. Engine should shut off.
KUBOTA reverse awareness system
(KRA system) Test 2 (operator on the seat)
1. Start and run the engine at 1/4 throttle.
2. Engage the PTO switch.
3. Press the KRA system override switch.
4. The KRA indicator light should flash.
5. Press slightly on the reverse side of speed control
pedal.
6. Engine should not shut off.
Remove the fuse located in the panel before test 3.
KUBOTA reverse awareness system
(KRA system) Test 3 (operator on the seat)
1. Start and run the engine at 1/4 throttle.
2. Engage the PTO switch.
3. Press the KRA system override switch.
4. The KRA indicator light should not flash.
5. Press slightly on reverse side of speed control
pedal.
6. Engine should shut off.
CHECK WHILE OPERATING
THE ENGINE
1. Check color of the exhaust fumes.
2. Check the headlights.
3. Check performance of the PTO clutch.
4. Check safety switch, seat safety control, and PTO
safety control.
If one of these do not operate properly, contact your
KUBOTA Dealer immediately.
5. Check for abnormal noise and vibration.
CHECKING SAFETY SYSTEMS OPERATING THE ENGINE
T2090BR-AU,T2290KW-AU,T2290KWT-AU
25

Kubota T2290KWT-AU Specifications

General

Brand	Kubota
Model	T2290KWT-AU
Category	Lawn Mower
Language	English